1 Pflueger Criterion Model No. CTN3430R Reel Part New Custom Made Bail
SpringUSD $6.00
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
I make these custom bail springs by hand in my workshop from
stainless steel spring wire. I have been making bail springs for approximately
20 years for use in my various reels. They function like factory made ones and
have essentially the same use life. I’ve
been selling bail springs on Pricetronic since 2014. I’ve had a 99% plus rate of
success with their quality. If you have an issue with the installation or
function of a spring, please contact me immediately. I will work to make things
right to your satisfaction.
FIND MY OTHER CUSTOM MADE BAIL SPRINGS BY CLICKING ON “See Other Items”.
BAIL SPRING INSTALLATION:Remove
the bail spring cover screw and cover. Remove
the bail screw on the same side as the bail spring. Remove the
old bail spring. Insert
the bottom of the new spring (generally the short arm) into the hole in
the rotating reel head. Place
the bail over the bail spring tab and insert the tab of the long arm of
the bail spring into the bail. Position
and hold the bail in place and screw in the bail screw. Put the
bail spring cover into place and screw in the cover screw. Try the
bail to determine if the installation is successful.
If the bail does not work properly, take the bail spring cover off to make sure the bottom arm is engaged. Flex the bail with this open to see if the top of the bail spring is engaged in the bail. If both of these are engaged put the bail spring cover back into place. If they are not engaged repeat the installation instructions.
If the bail spring appears to work weakly, loosen the bail screw several turns and try the bail. If the bail now works properly, the bail is sprung. A sprung bail will cause the bail and bail screw to rub on each other and reduce the free play of the bail. The bail must be sprung back into a position to allow free play of the bail.
I combine ship. I charge the full shipping and handling amount for the first item and then $1.00 for each additional item.
FIND MY OTHER CUSTOM MADE BAIL SPRINGS BY CLICKING ON “See Other Items”.
BAIL SPRING INSTALLATION:
If the bail does not work properly, take the bail spring cover off to make sure the bottom arm is engaged. Flex the bail with this open to see if the top of the bail spring is engaged in the bail. If both of these are engaged put the bail spring cover back into place. If they are not engaged repeat the installation instructions.
If the bail spring appears to work weakly, loosen the bail screw several turns and try the bail. If the bail now works properly, the bail is sprung. A sprung bail will cause the bail and bail screw to rub on each other and reduce the free play of the bail. The bail must be sprung back into a position to allow free play of the bail.
I combine ship. I charge the full shipping and handling amount for the first item and then $1.00 for each additional item.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
